Configure your Audio and Video Devices

Configure your Audio and Video Device

1. Select " Audio configuration" icon at the top left of the main window (the icon is given as an example and corresponds to the use of the connected headset).
2. Select the available device to use as " Camera". The video is displayed to test the device.
3. Select the available device to use as " Microphone". The microphone reception level is represented by an active status bar when the microphone is active.
4. Select the available device to use as " Speaker". Test your device by clicking on "Play sound" button ("Stop sound" to stop the test). 
5. Activate or deactivate noise reduction by checking or unchecking "Activate noise reduction" box. This option enhances audio quality by minimizing background disturbances.
6. Activate or deactivate precise control over mic sensitivity for clear audio in calls by checking or unchecking "Automatically adjust mic sensitivity" box (deactivate if you have initial silence, and activate if others mention low-volume issues).  
7. If the camera is active, you can customize the video background using blur effects (two levels of blur) and/or environments to maintain privacy (activate 'Mirror mode' to flip the background image)
   Select "Virtual background" tab:
   - remove effects,
   - blur the background,
   - select a predefined background ,
   - select a personal image (maximum file size: 4Mo, file type: png, jpg),
   - select an animated background,
   - use the symmetrical image by checking "Mirror mode",
8.  Click on the "Close" button (or on the X in the window) to save your choice and return to the previous window.

Note: The company administrator can add new video backgrounds.

Push to Talk

When this option is enabled, your microphone is only activated when you press on a shortcut key.

1. Select " Audio configuration" icon at the top left of the main window (the icon is given as an example and corresponds to the use of the connected headset).
2. In the section "PUSH TO TALK", enable the option by checking the "Enable Push to Talk" box.
3. Define the "Activation delay" (delay between pressing the key and the microphone being activated).
4. Define the shortcut by selecting a key on your keyboard.
5. Click on the "Close" button (or on the X in the window) to return to the previous window.